Download s71500 Webserver Function Manual en-US en-US PDF

Titles71500 Webserver Function Manual en-US en-US
File Size2.7 MB
Total Pages74
Table of Contents
                            Web server
Preface
Table of contents
1 Documentation guide
2 General information
	2.1 Properties of the Web server
	2.2 Configuring the Web server
	2.3 Language settings
	2.4 Updating and storing information
3 Websites
	3.1 Start page with general CPU information
	3.2 Identification
	3.3 Diagnostic buffer
	3.4 Module information
	3.5 Alarms
	3.6 Communication
	3.7 Topology
		3.7.1 Introduction
		3.7.2 Graphical view
		3.7.3 Tabular view
		3.7.4 Status overview
		3.7.5 Examples for graphical topology views
	3.8 User pages
		3.8.1 AWP commands
			3.8.1.1 PLC tags
			3.8.1.2 Special tags
			3.8.1.3 Enum types
			3.8.1.4 Fragments
		3.8.2 Configuring user pages
		3.8.3 Programming the WWW instruction
		3.8.4 Example of a user page
			3.8.4.1 Website for monitoring and controlling a wind turbine
			3.8.4.2 Reading and displaying data from the CPU
			3.8.4.3 Using enum types
			3.8.4.4 Writing user inputs into the controller
			3.8.4.5 Writing special tags
			3.8.4.6 HTML code of the user page "Remote Wind Turbine Monitor"
	3.9 File browser
	3.10 Reading out service data
Glossary
Index
	A
	C
	D
	F
	H
	I
	L
	M
	P
	R
	S
	T
	U
	W
                        
Document Text Contents
Page 1

s7_1500_webserver_topologie_tabellarisch_en.eps


� �Web server


___________________

___________________

___________________

___________________



SIMATIC

S7-1500
Web server

Function Manual




01/2013
A5E03484625-01

Preface




Documentation guide
1



General information
2



Websites
3

Page 2

Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
GERMANY

A5E03484625-01
Ⓟ 01/2013 Technical data subject to change

Copyright © Siemens AG 2013.
All rights reserved

Legal information
Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.

DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION
indicates that minor personal injury can result if proper precautions are not taken.

NOTICE
indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.

Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.

Proper use of Siemens products
Note the following:

WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

Page 37

topologie_3.eps


Websites
3.7 Topology

Web server
Function Manual, 01/2013, A5E03484625-01 37

⑤ PROFINET devices of a different PROFINET IO subsystem
● In the target topology:

A PROFINET device of a different PROFINET IO subsystem is indicated by means of a
green link (or red link for interchanged ports) if it is available on the bus and directly
adjacent to an accessible configured PROFINET device ①. If the PROFINET device of a
different PROFINET IO is unaccessible, it is identified by means of a yellow connecting
line.
The connection between two PROFINET devices which both belong to a different
PROFINET IO subsystem cannot be identified and is always indicated in yellow color.

● In the actual topology:

The PROFINET device of a different PROFINET IO subsystem is not displayed unless it
is directly adjacent to a configured PROFINET device. The PROFINET device is shown in
light gray with a dashed line around the device header.

The status of PROFINET devices of a different PROFINET IO subsystem is not displayed in
the device header.

⑥ Displaying faulty neighbor relationships
Devices from which the relation data could not be read completely or with error are
highlighted in light gray with a red frame.



Note
Displaying faulty neighbor relationships

If a device does not have the matching firmware, the relationships cannot be displayed
correctly. This means a firmware update of the respective device is required in case a faulty
neighbor relationship is displayed.

Views after changes to the configuration
● If a device fails, it remains at the same position in the "Target topology" view. This error

state is indicated with a red border around the device header and the icon .

● If a device fails, it is displayed in the "Actual topology" view. This error state is indicated
separately in the bottom area with a red border around the device header and
the icon .

Link between the "Topology" and "Module information" websites
The two websites, "Topology" and "Module information", are linked. A click on the header of
a selected module in the topology view automatically takes you to this module on the
"Module information" website.

You can find additional information on this in the chapter Module information (Page 24).

Reference
Additional examples for graphical topology view are available in the chapter Examples for
graphical topology views (Page 41).

Page 38

topologie_4.eps


Websites
3.7 Topology

Web server
38 Function Manual, 01/2013, A5E03484625-01

3.7.3 Tabular view

Topology - tabular view
The "Tabular view" always shows the "Actual topology".

Start page

Identification

Diagnostic Buffer

Module information

Messages

Communication

Topology

Customer pages

Filebrowser

Topology

Graphic view Table view Status overview

Log out

Admin

16:43:22 English

CPU 1516/SIMATIC S7 CPU 1516 PN/DP

Status
Port

Name Port
CPU 1516-3PN/DP

IM155-6PN-2

IM155-5PN

SCALANCE-X-204IRT SCALANCE-X-204IRT

Name
Partner port

SCALANCE-X-204IRT

SCALANCE-X-204IRT
cpux6-7-1xet200mp

CPU1516-3PN/DP

IM155-5PN

IM155-5PN

Port

port-001

port-001

port-001

port-004
port-002

port-001
port-002

port-001
port-002
port-003

SCALANCE-X-208

cpux6-7-1xet200mp

SCALANCE-X-208

port-002 port-002

port-004

CPU 1516-3PN/DP

IM 155-6PN ST

IM 155-5PN ST

port-001

Module type

Off

15.11.2011


Figure 3-15 Topology - tabular view

① Meaning of the symbols relating to the status of the PROFINET devices

Table 3- 3 Meaning of the symbols relating to the status of the PROFINET devices

Symbol Meaning


Configured and accessible PROFINET devices

?
Unconfigured and accessible PROFINET devices


Configured but inaccessible PROFINET devices

!
Devices for which neighbor relations cannot be determined, or for which the neighbor
relationship could not be read out completely, or only with errors

Page 73

s7_1500_webserver_startseite_login_en.eps




Web server
Function Manual, 01/2013, A5E03484625-01 73

Index



A
Access restriction, 15
Activating the Web server, 11
Alarms, 30
Asian languages, 16
Automatic updating, 12
AWP commands, 46

Enumeration types, 52
Fragments, 53
PLC tags, 48
Special tags, 50

C
Communication, 32

Parameters, 32
Resources, 33

D
Diagnostic buffer, 23
Display of texts in different languages, 16

F
File browser, 67

System files, 67

H
HTTPS, 12

I
Identification, 22

L
Language settings, 16

M
Module information, 24

P
Properties of the Web server, 9

R
Reading out information, 10
Reading out service data, 68

S
Safety functions, 9
Settings, 11
Start page, 19

Intro, 19
Log in, 20

T
Topology, 34

Actual topology, 34
Examples, 41
Graphical view, 35
Status overview, 40
Tabular view, 38
Target topology, 34

U
Updating and saving, 18

Deactivating automatic updating, 18
Saving alarms and diagnostic buffer entries, 18

Updating user pages, 46
User administration, 13
User pages, 15, 44

Configuring user pages, 55
Example user page, 58
WWW instruction, 56

Page 74

s7_1500_webserver_topologie_grafisch_en.eps


Index


Web server
74 Function Manual, 01/2013, A5E03484625-01

W
Web access

Via HMI devices and mobile terminal devices, 10
Via PG/PC, 10

Web browser, 9
Web server language, 13

Similer Documents